Tikka T3 Laminate Stock, RH: MGW

See This Report on Suggestions for a Tikka t3x aftermarket hunting stock?

selecting a selection results in a complete page refresh.

This brand-new MCS layup option was created with the precision rifle competitor in mind. Featuring an enhanced inner shell and an exclusive thick fill, the Double Dead shell will permit much better balance, stability, recoil reduction, and harmonic dampening. While this layup will come out heavier, it is frequently used to assist balance a rifle constructed with a much heavier contour barrel.

1500 - Howa - Stock Finder

I have actually had this rifle for a long period of time now, I can't find the expense of sale but I believe I bought it around the 2nd year they began importing them. I like it quite well however there are a couple of things I do not care bottom piece is plastic rather of metal ... the LOP is too long with winter clothes on ... and the plastic stock was slick as our Georgia red clay roads after a tough rain.

Things about Tikka t1x aftermarket stockShop Accessories for Tikka - Cvk

The Tikka is not my only synthetic stock but it is the just one that's this slick. So I began thinking of painting it to make it a bit more grabby. Did a lot of research, then just leapt right in. The Tikka stock is notorius for being tough to bed or paint since nothing sticks to it, so this is how I did it.

Then I removed the recoil pad and plastic filler and the sling studs. And began sanding. Most referrals state to utilize 220 grit but I utilized 100 grit, since I'm not after a smooth finish I seek a rough surface, something that assists paint stick. Keep Checking Back Here sanded it until all the slick black was off and the surface area was gray and rough.

Tikka T3x Sniper Rifle Package - Sniper Central

Then another good wipe with a clean cloth and alcohol. Now I'm wearing rubber gloves and outside with the stock hanging on a wire connected to a recoil pad screw. And another good wipedown with alcohol. After drying good it was time to paint. First was several light coats of a Primer/Paint mixture.

Tikka Altitude Stock - Mesa Precision Arms - An Overview

I made sure not to let it run. Two days later I sprayed several light coats of a textured brown paint and let it dry 48 hours. I didn't like it. The surface was simply too gritty, it seemed like 60 grit sandpaper. So I cut a piece of scuff pad and started to lightly sand the surface area.