How to Cut a Laminate – Formica Countertop – DIY House Tips

Not known Facts About how to cut ikea laminate countertop - The Sudanese Network

Cooking Area Sink Cutouts in Laminate Countertops, The exact same procedure and tools are utilized to cut out the opening for drop-in sinks in your kitchen area. Procedure carefully, drill corner holes to start cuts with a jigsaw (also utilizing a blade with a high tooth count for a cleaner cut), and make as consistent a cut as you can.

If you swerve a bit and the cut is not absolutely straight, the rough edges will be covered by the boundary rim of the drop-in sink. If that rim is well sealed with a silicone sealant, water will not seep in to cause damage to the countertop. Let's Get To The Formica Counter Top Cut, With tools put together, shatterproof glass, and face mask on, let's get to work.

RCS Custom Kitchens

Mark the line with the masking tape and established your rip guide so your circular saw blade is lined up with the cut line. A blade depth of 1/8th inch will be adequate, so set the saw for your cut. Sluggish and consistent wins the race, so to speak. The goal is to make a precise cut without cracking, and sluggish and steady will help you reach it.

A little swerving will not harm completion outcome, as the belt sander or sanding block will cure it into a straight line. Set the blade depth deeper, make another pass to cut much deeper into the countertop; or, utilize a jigsaw for that further cut. When you have actually ended up cutting through the countertop, eliminate the cut piece.

The Greatest Guide To Best way to cut formica/laminate counter tops - the Pelican

Swerves during cutting will also disappear, and you'll wind up with a straight website line. Make certain the sanding strokes are down, not up, so you don't raise the laminate off the counter top or trigger a chip. Vacuum up the great particles, and the job is done. This Article Is More In-Depth 's that fine particles is why you require shatterproof glass and face masks secure your eyes, and let the mask catch that fine particles in the air rather than breath it in.

Plunge Cutting in a Countertop - YouTube

Whether it's simply a few inches or a foot or 2, a laminate backsplash provides a suitable finish to your cooking area counters. Usually, the backsplash will be cut prior to setup. You'll follow the same process for its cutting as you did for the countertop itself. However, if the laminate is currently installed, you can cut it down in location.